Loose Pebble Shower Floor

While taking a shower, there is an all-time risk of a slippery floor, and anyone can hurt themself, as the shower floor always gets wet and foamy. So,  while installing a shower floor, you should choose the material that holds up well against the heat, water, and foamy solution.

In this regard, many people think that a pebble shower floor can be the perfect option to get rid of slippery shower floors. Pebbles are considered water-resistant, so you can choose to set your loose pebble shower floor.
In today’s article, I will discuss the Loose Pebble Shower Floor and answer different questions related to the Pebble shower floor. So without any further delay, Let’s start with today’s article.

How To Do A Loose Pebble Shower Floor?

If you want to have a loose pebble shower floor, you can do it yourself if you can spare proper time for this task.  First of all, you have to choose the material for the shower floor. However, you can prepare a shower floor with any kind of loose rock, but when you are making a pebble shower floor, you have to choose a smooth, soft corner, all rounded pebbles for the shower floor.

You can also install pebble sheets on your shower floor; it can save your time and energy. These pebble sheets will come properly backed, so installing it will be easier instead of one pebble. But if you want to set loose pebble showers on your own, let’s check the following process.

  1. Installation Of Loose Pebble Shower Floor:

You should place a waterproof liner sheet before installing a loose pebble shower floor so that your floor’s inner surface may not damage after installing the pebble layer after setting the waterproof floor.

Spread a thin layer of heavy artillery for bonding the pebble. You can use any adhesive solution recommended by the pebbles seller to fit properly. After setting the solution, place the pebbles according to your wish to create any kind of look or design. You should not leave any spaces between the pebbles, so use small and big pebbles to cover all places.

2. Filling Of The Spaces:

After setting all the pebbles on the shower flower, let them dry completely. After getting it dried, you have to plaster all spaces between the pebbles so that any dirt or liquid mixture may not pile up between them. 

So now, apply the grout mixture with the grout hover between the places of pebbles. After laying it properly, remove the excess grout mixture from the tops of the pebbles with the help of any cleaning sponge without letting it dry. Thus, with these two easy steps, you can set loose pebble shower floors, but along with these processes, you should know about another basic thing to maintain a Loose Pebble Floor.

3. Maintenance Of Loose Pebble Floor:

After setting the grout mixture, same as after placing pebbles, you have to wait until it gets dry properly.  Once the mixture gets dried, you must apply waterproof adhesive on the pebble’s floor. This sealant will prevent the grout mixture from absorbing the water because water or other liquid mixture like soaps can cause the grout to break down after some time.

The waterproof sheet also prevents the pebble floor from discoloration because of cosmetic products’ chemicals. It will also occasionally need minor cleanse for the maintenance of the loose pebble shower floor.

Can Our Pebble Floor Shower Be Repaired After Grout And Stones Are Coming Loose?

If a few stones are coming loose, you can fix them again by replacing them or applying the adhesive mixture layer, same as you can fix the grout with a waterproof layer, as I mentioned in the above paragraph. It will repair your pebble shower floor.

Frequently Asked Question 

Question No 1: How to fix the loose tiles in the bathroom at home? 

Answer: There are many methods to fix loose tiles in the bathroom. Here I am going to tell you about the easiest method that will help you out in this process. 

  • First of all cut the grout 
  • After cutting the grout you have to remove the tiles
  • After that prepare the wall or the floor of the bathroom. 
  • Now you have to remove the old adhesive from the removed tiles 
  • After removing the adhesive you have to apply a new layer of adhesive on the tiles
  • After applying the layer of adhesive to the tiles you have to press and set it. 
  • At last grout around the replaced tiles

Question No 2: Can you use Gorilla glue or gorilla adhesive on the shower tiles? 

Answer: Gorilla glue is the type of adhesive glue mostly used in construction areas. This glue can be used to hold the surfaces of wood, drywall,  concrete, molding, trim, paneling, and tiles also. In short, you can use this glue for the shower tiles also. 

Question No 3: How often you should reseal the floor tiles or floor stone of the bathroom? 

Answer: The stones and the tiles of the bathroom floor are very porous. Ultimately it needs to be resealed after every three to four years. Before resealing, you must clean and prepare the walls and floor first. 

Question No 4: What will happen if the water gets under the tiles in bathrooms? 

Answer: It is a common thing that the water gets under the tiles of the bathroom. When the water got inside the tiles it spread the moisture with help of the backer board. Additionally, this surface will get dry because the tiles are directly attached to its surface. Ultimately the backboard will start to deteriorate and damaged. 


A Loose Pebble shower floor is the best way to install a shower area if you have small children in your family, as there will be no more risk of a slippery shower floor.

I have shared some basic details about installing the Loose Pebble shower. If you need any other information about the pebble shower, do let me know in the comment section. I will try to cover that information.

Sharing Is Caring:

Leave a Comment